U-Line Refrigerators Repair

CAUTION
Grounding precautions need to be taken whenever touching a bare circuit board. Attach an anti-static wrist strap to reliable ground and wear it whenever handling the circuit board. Also, handle boards carefully and avoid touching components.

Program Procedure

1. Unplug unit and install new board.
2. Plug in unit.
3. The display may show SP or –, either is OK.
4. Install a jumper on J3.



NOTICE
On drawer models, both bottom and top drawers must be open to program the board.

5. Hold down warmer, colder and light button until display shows model number and main board beeps.
6. Use warmer / colder to select new model number.

Model Selection Chart

Model: 2175R / 2175RC
120 Volts: 61
220 Volts: 75
Board Part # 68104-S

Model: 2175WC / 2175WCC
120 Volts: 62
220 Volts: 76
Board Part# 68104-S

Model: 2175EBEV / 2175BEVC
120 Volts: 63
220 Volts: 77
Board Part# 68104-S

Model: CO2175FF / CO2175F
120 Volts: 64
220 Volts: 78
Board Part# 68104-S

Model: 2175RF
120 Volts: 65
220 Volts: 79
Board Part# 68104-S

Model: *CO2175DWR / C2275DWR
120 Volts: 66
220 Volts: 80
Board Part# 68104-S

Model: CLR2160
120 Volts: 67
220 Volts: 81
Board Part# 68104-S

Model: CLRCO2175
120 Volts: 68
220 Volts: 82
Board Part# 68104-S

Model: *2175DWRR / 2275DWRR / 2275DWRC
120 Volts: 70
220 Volts: 84
Board Part# 68104-S

Model: 2115R
120 Volts: 71
220 Volts: 73
Board Part# 68104-S

Model: 2115WC
120 Volts: 72
220 Volts: 74
Board Part# 68104-S

Model: *2275DWRWC
120 Volts: 85
220 Volts: 86
Board Part# 68084-S

Model: 2275ZWC (Dual Control)
120 Volts: 85
220 Volts: 86
Board Part# 68084-S

Model: 2275ZWC (Single Control)
120 Volts: 87
220 Volts: 88
Board Part# 68084-S

* Bottom and top drawer must be open to program the board.
Board Part # 68072-S has been replaced by 68104-S.

7. Press and release light key.
8. Wait for display to stop flashing.
9. Remove jumper from board.
10. Unplug unit and wait 5 seconds.
11. Plug unit back in.

Wait for the beep and the display to show the set point.