Thermador oven error codes MEW301

Thermador Oven Error Codes MEW301

January 29, 2025 Russ 0 Comments
  • E000 – Wrong module combination control module & user interface are mismatched. Check module combination.
  • E003 – Electronics too hot user. Interface exceeds 85°C (185°F).
  • E005 – Communication error loss of communication between user interface & control module. Start-up error. Check connection of all communication lines & all control module inputs.
  • E009 – ROM check error in user interface.
  • E010 – Data memory error in user interface.
  • E011 – Continuous pushing of single key. Check user interface module assembly. Inspect touch PCB.
  • E012 – Defective user interface PCB temp sensor.
  • E014 – Key error. Check user interface module assembly. Inspect touch PCB.
  • E032 – Continuous pushing of keys 10 seconds of multiple keys being pressed.
  • E101 – Cvt.1 Temp. Sensor open.
  • E104 – Cvt.1 Temp. Sensor shorted.
  • E106 – Cvt. 1 Door latch does not lock.
  • E107 – Cvt. 1 Door latch does not unlock.
  • E115 – Cvt. 1 Temp, in unlocked cavity too high.
  • E116 – Cvt. 1 Probe error standard probe module is a part of the control module.
  • E118 – Cvt. 1 Cooling fan supervision error cooling fan speed is too low or too high.
  • E122 – Cvt. 1 Probe sensor temperature too high.
  • E123 – Cvt. 1 Probe sensor temperature too low.
  • E124 – Cvt. 1 Door switch error door switch is in an undefined state.
  • E126 – Cvt. 1 Door latch error door latch is in an undefined state.
  • E303 – Electronics too hot. Control module exceeds 100°C (212°F).
  • E309 – ROM check error in control module.
  • E310 – Data memory error in control module.
  • E312 – Defective control module PCB temp sensor.

leave a comment

For security, use of Google's reCAPTCHA service is required which is subject to the Google Privacy Policy and Terms of Use.