Fisher Paykel refrigerator controller installation

Instruction sheet for 844560P and 844561P board replacement

Fisher Paykel refrigerator controller installation. Controller initialisation RS36 & RS90. All markets model setting.

When replacing a controller in these products the type of cabinet (door type) may need to be programmed.

Spares controllers, part numbers 844560P and 844561P are default set to the french door model.

When used in the single door refrigerators the model must be set upon installation of the controller.

SETTING TO SINGLE DOOR MODEL FROM FRENCH DOOR MODEL

1. Turn the refrigerator on at the supply.
2. Open the door gaining access to the display.
3. Press the ALARM MUTE, COLDER AND WARMER buttons together for four seconds within 15 seconds of power- up.

• The controller will-sound three short beaps to inform that the single door model has been set.
• The fridge is now ready for use.

SETTING TO FRENCH DOOR MODEL FROM SINGLE DOOR MODEL

1. Turn the refrigerator on at the supply.
2. Open the door gaining access to the display.
3. Press the ALARM MUTE, COLDER AND WARMER buttons together for four seconds within 15 seconds of power- up.

• The controller will sound five short beeps to inform that the french door model has been set.
• The fridge is now ready for use.

Note: if for any reason a controller needs to be reinitialised, repeat the steps above.